500DA-HD-N | 1 x 8 HD/SD-SDI Non-Reclocking Distribution Amplifier | Evertz | Net-AV
0
HOME + SERVICES PRODUCTS + CLIENTS SHOP ABOUT US
Pro AV Catalog
Evertz  - 500DA-HD-N
Request
Quote
All Products
from this brand

1 x 8 HD/SD-SDI Non-Reclocking Distribution Amplifier

Model: 500DA-HD-N

  • Normal mode for SMPTE ST 259 (143 Þ 540Mb/s) or SMPTE ST 292-1 (1.5Gb/s) signals - autodetects correct bitrate
  • Jumper Selectable mode for DVB-ASI
  • Jumper selectable non-reclock mode for SMPTE ST 310 (19.4Mb/s) signals or any other SDI signal within the 143Mb/s to 1.5Gb/s range
  • Fully hot-swappable from front of frame with no BNC disconnect required
  • Independent isolated output drivers to ensure no cross channel loading effects (i.e. no need to terminate unused outputs)
Project List
Product Info
Tech Specs
Documents
The Evertz 500DA-HD-N Non-Reclocking Distribution Amplifier provides reliable distribution of your HD and sd SDI video signal at rates of 1.5Gb/s and 143Mb/s to 540Mb/s. The DA features an auto-equalized input with eight serial outputs. The 500DA-HD-N has been designed for use as a SMPTE ST 292-1 (1.5Gb/s), DVB-ASI, SMPTE ST 259, or SMPTE ST 310 distribution product. The 500DA-HD-N DAs are housed in the 3RU 500FR frame that will hold up to 16 modules.
  • Normal mode for SMPTE ST 259 (143 Þ 540Mb/s) or SMPTE ST 292-1 (1.5Gb/s) signals - autodetects correct bitrate
  • Jumper Selectable mode for DVB-ASI
  • Jumper selectable non-reclock mode for SMPTE ST 310 (19.4Mb/s) signals or any other SDI signal within the 143Mb/s to 1.5Gb/s range
  • Fully hot-swappable from front of frame with no BNC disconnect required
  • Independent isolated output drivers to ensure no cross channel loading effects (i.e. no need to terminate unused outputs)
  • Tally output on Frame Status bus upon loss of input signal for quality monitoring
  • VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 500FR frame with 500FC VistaLINK® Frame Controller
 
Request Quote
 

Suggested Products