7700R2x2-HES | 2x2 HD/SD-SDI Modular Bypass Protection Router with Softswitch™ | Evertz | Net-AV
0
HOME + SERVICES PRODUCTS + CLIENTS SHOP ABOUT US
Pro AV Catalog
Evertz  - 7700R2x2-HES
Request
Quote
All Products
from this brand

2x2 HD/SD-SDI Modular Bypass Protection Router with Softswitch™

Model: 7700R2x2-HES

  • Support for HD and SD SDI inputs per SMPTE ST 292-1 and SMPTE ST 259-C
  • Auto sensing of HD and SD input formats
  • Supports both 525i/59.94 or 625i/50 SD video formats
  • Automatic change-over based on programmable input signal monitors
  • Generation of three re-clocked program outputs and one preview output (HD if HD inputs are applied, SD if SD inputs are applied)
Compare
Project List
Product Info
Tech Specs
Documents
The 7700R2X2-HES incorporates Evertz® proprietary SoftSwitch™ technology with full audio proc for clean video and "popless" embedded audio switching. Line synchronizers on the video inputs can accommodate differences in timing of up to ±1/2 a line on the video inputs. The 7700R2x2 series modules are bypass protection routers for high definition 1.5Gb/s or standard definition 270Mb/s serial digital video signals. These modules have two HD/SD compatible inputs signals (program and back-up) that support all popular SMPTE ST 292-1 video formats as well as 525/625 line SMPTE ST 259-C video formats. These modules also provide three re-clocked primary outputs, and one re-clocked backup output. Based on a programmable set of input signal monitors, the main program or the back-up input signals can be automatically routed to the primary program outputs to ensure the delivery of a valid program output in the case of an input signal fault. Switching can also be controlled and monitored through the use of module GPIOs, card edge controls or remotely using either network control panels (CP-2116E, CP-2232E) or VistaLINK® PRO. The program output is bypass relay protected and provides protection on the program path. If the module is removed from the enclosure or power to the module is lost, the program path is maintained.
  • Support for HD and SD SDI inputs per SMPTE ST 292-1 and SMPTE ST 259-C
  • Auto sensing of HD and SD input formats
  • Supports both 525i/59.94 or 625i/50 SD video formats
  • Automatic change-over based on programmable input signal monitors
  • Generation of three re-clocked program outputs and one preview output (HD if HD inputs are applied, SD if SD inputs are applied)
  • GPI control inputs for manual routing control
  • GPO status outputs for reporting selector cross-point status
  • Card edge menu control for configuration of operating modes
  • Card edge LEDs for reporting signal presence, router state, module status
  • Remote monitoring through NCP panels or VistaLINK® PRO.
  • Bypass relay protection on program output
  • Controllable switch point when a Genlock reference is provided
  • VistaLINK® capable for remote monitoring, control and configuration capabilities via SNMP; using VistaLINK® PRO,CP-2116E or CP-2232E Control Panels. VistaLINK® is available when modules are used with the 3RU 7800FRframe and a 7700FC VistaLINK® Frame Contro
  • Integrated SoftSwitch technology for clean video and "popless" embedded audio switching
  • Dolby E® compliant
  • VistaLINK® capable for remote monitoring, control and configuration capabilities via SNMP. VistaLINK® is available when modules are used with the 3RU 7800FRframe and a 7700FC VistaLINK® Frame Controller module in slot 1 of the frame
 
Request Quote
 

Suggested Products

by Crestron Electronics, Inc.
by Crestron Electronics, Inc.
by Thinklogical, A Belden Brand