7707EO15-3-HD | Triple HD Electrical to Optical Converter, 19.4Mb/s to 1.485Gb/s, 1550nm DFB Laser | Evertz | Net-AV
0
HOME + SERVICES PRODUCTS + CLIENTS SHOP ABOUT US
Pro AV Catalog
Evertz  - 7707EO15-3-HD
Request
Quote
All Products
from this brand

Triple HD Electrical to Optical Converter, 19.4Mb/s to 1.485Gb/s, 1550nm DFB Laser

Model: 7707EO15-3-HD

  • Three independent channels of electrical to optical conversion that support all SMPTE ST 292-1 standards at 1.485Gb/s
  • Supports all SMPTE ST 259 standards with operation from 143Mb/s - 360Mb/s
  • Supports additional standards of SMPTE ST 305 (SDTi), SMPTE ST 310 (19.4Mb/s), SMPTE ST 344 (540Mb/s), M2S and DVB-ASI (270Mb/s)
  • Automatic cable equalization to 300m @ 270Mb/s and 75m @ 1.485Gb/s with Belden 1694A (or equivalent) cable
  • Fully hot swappable from front of frame, with no fiber or BNC disconnect /reconnect required
Compare
Project List
Product Info
Tech Specs
Documents
The 7707EO15-3-HD is a Triple HD Electrical to Optical Converter, 19.4Mb/s to 1.485Gb/s, 1550nm DFB laser. SC/PC, ST/PC or FC/PC connector options. Tally output on Frame Status bus upon loss of input signal.
  • Three independent channels of electrical to optical conversion that support all SMPTE ST 292-1 standards at 1.485Gb/s
  • Supports all SMPTE ST 259 standards with operation from 143Mb/s - 360Mb/s
  • Supports additional standards of SMPTE ST 305 (SDTi), SMPTE ST 310 (19.4Mb/s), SMPTE ST 344 (540Mb/s), M2S and DVB-ASI (270Mb/s)
  • Automatic cable equalization to 300m @ 270Mb/s and 75m @ 1.485Gb/s with Belden 1694A (or equivalent) cable
  • Fully hot swappable from front of frame, with no fiber or BNC disconnect /reconnect required
  • High density - accommodates up to 45 independent channels of optical conversion, in a single 3RU frame
  • Occupies one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure
  • Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK® capability
  • Detection and display of input cable length
  • Operation with multi-mode or single-mode fiber
  • SC/PC, ST/PC or FC/PC connector options
  • Tally output on Frame Status bus upon loss of input signal
  • VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
 
Request Quote
 

Suggested Products